Harmonic-resolution-systems MXR Audio Stand Bedienungsanleitung

HARMONIC RESOLUTION SYSTEMSMXR AUDIO STAND

Second Panel Assembly - Remove the second panel from the wooden crate andplace it in a separate area to remove all the packing material (see Photo 12

Install all sixteen screws, eight at each panel block on the second panel, 1/4-20 x3/4" screws to the brace (see photo 16) until they are fully e

When the proper location has been achieved, torque all 32 of the 1/4-20 x 3/4"screws at the panel block locations (see Photo 20) and the 16 1/4-2

Photo 23 Photo 24Once all the feet are installed, yo

Be very careful not to cross-thread the fastener. The fastener should thread invery easily. If it does not, back it out and start it in again. If n

Photo 27Isolation Base Installation into MXR Frame - Uncrate each of the isolationbases if not already complete. Make sure you r

Photo 28 Completed MXR Audio Stands. Singlewide shown on left, and doublewide shown on the right.Loading Components into MXR Frame - Carefully load

supplied with the MXR frame. The cable organizer can also be used to support theweight of a network box for cables that apply this approach.Solid Bra

Care and MaintenanceThe MXR Audio Stand is a very low maintenance item that will provide many yearsof trouble-free performance by applying these basic

Discover Your System’s Capability

Do not wash the interior flex element of the isolation feet even if you see a coatingor white substance on the surface of the flex element.Be very car

WarrantyLimited Five Year WarrantyHarmonic Resolution Systems warrants to the purchaser that each HRS MXRAudio Stand is free of manufacturing defects

HARMONIC RESOLUTION SYSTEMS INC.2495 Main Street, Suite 355Buffalo, NY 14214Telephone: 716-873-1437Web: www.avisolation.comE-mail: info@avisolation.

IntroductionThank you for purchasing the Harmonic Resolution Systems MXR Audio Stand.When used properly, it will give you many years of superior music

Safety InstructionsIMPORTANT WARNINGS!Do not place any tall objects on the top shelf of the MXR Audio Stand. A tall objectis any object with a height

Set-Up InstructionsThe MXR Audio Stand consists of a frame structure and the isolation bases thatsupport each component. The standard three and four

Photo 1 Photo 2Lift the panel out of the crate by lifting vertically a

vertical panel threaded insert. (This ensures maximum engagement between theinsert and the foot). Repeat this procedure and install the second foot to

Photo 8 Photo 9

Install all eight 1/4-20 x 3/4" screws to the brace (see Photo 10) until they are fullyengaged but do not torque the screws at this time. You wi